XLR 3 Pin to Blunt Installation Cable with Neutrik XLR Connectors (Mal - Custom Cable Connection

€ 55.50

4.5
(89)
En stock
Descripción

Custom Cable Connection microphone cables are a great choice for custom "pro" audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires wit
Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
Features:

  • High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.
  • PVC Black Jacket
  • Shield: Bare annealed copper
  • Capacitance: 21 pF/ft. @ 1 kHz
  • Characteristic Impedance: 70 Ohm NOMINAL
  • D.C. Resistance @ 20°C: 23 Ohm/1000'
  • Gold Plated 1/4in Male Stereo Rean NYS228BG Connectors
  • Assembled in Dallas, TX by Custom Cable Connection

    Pinout
  • Tip : Red
  • Ring : Blue
  • Shield : Shield
    •

    Don't see the length you are looking for, we will build it for you!
  • For a custom length quote, call: 866.770.3207 or email: sales@

    • Our 3.5mm Stereo Male (TRS) to 1/4 inch Stereo Male (TRS) Cable is designed to interconnect audio devices with stereo and mini stereo phone jacks. It is ideal for use in a variety of professional and consumer applications.

    Typical Applications:
  • Audio connections between multimedia devices.
  • Connect your iPod, laptop, or similar device to a mixing console, home theater devices, and amplifiers.
  • Works with any devices standard 3.5mm aux Jack, such as iPad, iPhone, iPods, MP3 players, Laptops, PCs, Cell Phones, Tablets, Home theater, speakers etc

    Features:
  • 2 Conductor, 24 AWG, stranded bare copper, polypropylene insulated, aluminum/polyester tape shield, PVC jacketed installation microphone wire
  • 3.5mm Male Stereo Solder Plug, Nickel plated with strain relief
  • 1/4 Plug with 3 Conductor Nickel Shell Solder Contacts

    Don't see the length you are looking for, we will build it for you!
  • For a custom length quote, call: 866.770.3207 or email: sales@

    • Custom Cable Connection balanced Neutrik microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is typically connected to ground.

  • The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210
  • 24-gauge bare copper conductors
  • Connectors: XLR Male Plug to XLR Female Jack
  • Rugged Nickel Plated XLR Connectors with Strain Relief
  • Neutrik NC3MXX and NC3FXX Connectors

    • Our 1/4 inch TRS cables allow your signal to be quiet, eliminating frustrating hums, buzzing, and crackles. These cables make an excellent interconnect cable for any 1/4 balanced line cable. This cable is a popular choice for lineout into soundboards, powered speakers and for use in touring and other live-sound applications. This cables flexible design eliminates kinks and twists for a tangle-free performance.
    Features:
  • High performance Balanced Microphone Cable 24 AWG with 95% spiral shield.
  • PVC Black Jacket
  • Shield: Bare annealed copper
  • Capacitance: 21 pF/ft. @ 1 kHz
  • Characteristic Impedance: 70 Ohm NOMINAL
  • D.C. Resistance @ 20¬∞C: 23 Ohm/1000'
  • Neutrik Connectors: NP3RX and NYS228
  • Assembled in Dallas, TX by Custom Cable Connection

    Don't see the length you are looking for, we will build it for you!
  • For a custom length quote, call: 866.770.3207 or email: sales@

    • Custom Cable Connection microphone cables are a great choice for custom pro audio hookups to connect microphones to PA amplifiers, mixers or extension cords. These hookups are balanced, which helps cut out noise and hum pickup. A balanced line consists of three paths of current flow, using a pair of twisted wires with a shield covering them. The twisted pair would carry the actual audio signal while the overall shield acts as a noise absorbing barrier. The shield is connected to ground.

  • The outer jacket is constructed from a durable, ultra-flexible matte black PVC compound. O.D.: .210
  • 24-gauge bare copper conductors
  • Connectors: XLR 3 Pin to 3 Bare Wires
  • Connector Options: Male (31096) or Female (31095)
  • Rugged Nickel Plated XLR Connectors with Strain Relief
  • Pinout
  • Pin 1- Shield
  • Pin 2- Red
  • Pin 3- Blue

    • 1 Foot Custom Cable Connection Pro-Audio Balanced Microphone with Neutrik NC3MXX XLR Male Connector to Blunt end Cable : Musical Instruments

    Neutrik NC3MEZ-B 3 Pin XLR Male Connector - Black

    Neutrik's XLR cable connectors

    XLR Cables 3ft/1M 2 Packs, Premium Heavy Duty Balanced Microphone Cable with 3-Pin XLR Male to Female Microphone Cord Connector Compatible with Microphones,Mixer,Speaker Systems,Preamps and More : Musical Instruments

    BALANCED XLR MIC CABLE: Two of the conductors are signaled (+ and -) and the last conductor (shield) serves as a guard to sensitive RFI [radio

    1 Foot Pro-Audio XLR Balanced Microphone Male to Blunt Economy 18 AWG Cable

    Xlr Mic Cable Pinout

    Neutrik's XLR cable connectors

    XLR 3 Pin Female to Blunt Install Cable - Custom Cable Connection

    Neutrik NA2MPMF 3 Pin XLR Male to RCA Phono Jack Adapter

    BALANCED XLR MIC CABLE: Two of the conductors are signaled (+ and -) and the last conductor (shield) serves as a guard to sensitive RFI [radio

    6 Foot Custom Cable Connection Pro-Audio XLR Balanced Microphone Female to Blunt 18 AWG Economy Shielded Install Cable

    Neutrik's XLR cable connectors