Veto Pro Pac LC Small Compact Tool Bag

Item# VT-VPP10018Veto pro Pac LC Small Compact Tool Bag Description WHERE THE XL IS MORE OF A GENERALIST BAG, THE LC TOOL BAG CATERS TO THE MORE JOB-SPECIFIC CROWD. Don’t misunderstand, it still offers transport-plane-like storage with 57 pockets
Item# VT-VPP10018Veto pro Pac LC Small Compact Tool Bag Description WHERE THE XL IS MORE OF A GENERALIST BAG, THE LC TOOL BAG CATERS TO THE MORE JOB-SPECIFIC CROWD. Don’t misunderstand, it still offers transport-plane-like storage with 57 pockets capable of handling 75 hand tools. If you’re any kind of tradesman, you’re going to love the bag’s layout. It’s perfect for all sorts of hand tools and can accommodate meters and butt-sets.   Specification PRODUCT SPECIFICATIONS: Width: 9.5” Length: 13.5” Height: 12” (Handle Folded Down) Weight (empty): 7.6 lbs. MAXIMIZED TOOL STORAGE CAPACITY: Vertical Tool Pockets (inside): 48 inside & 3 outside Flat Zippered Pockets (outside): 4 inside & 2 outside Neoprene Pockets: none D-Rings: 4 large and 5 small Exterior Electrical Tape Loop: 8” Fabric with Clip Closure Stainless Steel Tape Clip: Yes RUGGED MATERIALS & CONSTRUCTION: Waterproof Base: 3mm Injection Molded Polypropylene Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon Handle: Injection Molded Nylon Plastic w/ over-molded rubber grip Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs Fold-Back Snaps: 6 zinc, marine grade D-Rings: Powder Coated Steel Rivets: 38 zinc, marine grade rivets Stitching: Industrial Strength Double Nylon Stitching OTHER FEATURES: Shoulder Strap: Heavy Duty, Non-Slip Padded Shoulder Strap Warranty: 5 Years (see Veto warranty terms and conditions)   Additional Information Weight 5 lbs Dimensions 13.5 × 9.5 × 19 in VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE Keep the Zippers Clean & Lubricated Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well.  After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant. Protect the Zippers From Sharp Objects and/or Excessive Heat Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils. Don’t Overstuff the Bag Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!

ITS Expert Says The Veto Pro Pac range of tool bags have been designed to offer HVAC and other technicians the ultimate in mobile tool and device storage. The bags are built to last and will work as hard as you do Product Description The AX3516 Tech Pac is a compact and lightweight bag designed for mobile techs who only need to carry the essential tools and meters for service calls and the ocassional installation.

Veto Pro Pac Tech MC Tool Bag

Item# VT-VPP10018Veto pro Pac LC Small Compact Tool Bag, Description, WHERE THE XL IS MORE OF A GENERALIST BAG, THE LC TOOL BAG CATERS TO THE MORE

Veto Pro Pac LC Small Compact Tool Bag

Veto Pro Pac MC Carrying Case Tools

The award winning XL tool bag has 67 pockets that put all your must-have tools within reach and eye shot.

XL Extra Large Compact Tool Bag

Veto Pro Pac CT-LC Cargo Tote

TP-LC - VetoProPac

Veto Pro Pac Tech LC Tool Bag Load Out and Review

Compact, Zippered Service Tech Tool Pouch, The TP-LC is a one-sided, closable, compact-sized tool pouch that holds a variety of tools, meters,

TP-LC

TECHOT-MC Veto Compact Open Top Tool Bag

Veto Tech LC Tech Large Tool Bag , Black - Hvac Tools

Veto Pro Pac MP1X Leather Backed Small-Sized Tool Pouch

Veto Tech Lc 2024

Veto Pro Pac MC Carrying Case Tools

The TP-XXL is a closable mid-sized tool pouch designed with integral side mounted padded meter pockets. Each zippered meter pocket will securely fit meters up to 10 x 3.5 x 2. The TP-XXL can be customized to hold a variety of tools, meters, fasteners, small tablet computer, and various other gear.

Veto Pro Pac TP-XXL Tool Pouch

Veto Pro Pac TP-XXL Meter Pouch and TECH-MCT Tool Bag Combo